Classic Cooling System Protection

Attribute Description Product description: Bardahl Classic Instead of Lead is a safe lubricant for valves and cylinder heads, developed to reduce wear in engines designed for leaded gasoline. This environmentally friendly product lubricates as well or better than lead in gasoline. The Problem: Earlier engines and some agricultural and marine engines require high lead levels in gasoline to prevent wear on valves and cylinder heads. Unleaded fuel can lead to excessive wear and engine failure. The Solution: Bardahl Classic Instead of Lead prevents metal-to-metal contact and excessive wear in low-lead and unleaded gasoline. It provides protection against burn-in and wear of valves and cylinder heads. Benefits: Provides exceptional lubrication, extends gasoline storage life by 24 months, prevents premature seal wear and extends engine life. Product information: Article number: 1261B, Contents: 250 ml. Instructions for use: Safe to use in all engines, with or without leaded petrol and harmless to catalytic converters. Add to a full tank every time you fill up. The mixing ratio is stated on the packaging. One bottle is sufficient for 250 liters of gasoline.

Bardahl Classic Gear Oil SAE 90 GL1 is a 100% mineral single grade gear oil & gear oil. Bardahl Classic Gear Oil SAE 90 has a minimum of additives and is therefore fully compatible with bronze, copper, brass and non-ferrous metals. The viscosity matched to classics ensures a constant lubricating film under extreme loads. It is suitable for sealing materials of that time (paper, cork, felt and fabric). The excellent adhesion contributes to minimal wear after a long standstill. Category Description Specification API - GL1 Application Suitable for gearboxes and final drives of vintage cars. Contains <500ppm friction reducer

Bardahl Classic Motor Oil SAE 15W40 motor oil has been developed for the lubrication of all petrol and diesel engines. This motor oil has excellent cleaning and dispersing properties and a great ability to neutralize acid. The oil film provides very good lubricating properties. Bardahl Classic SAE 15W40 provides complete engine protection; it offers excellent engine cleanliness performance. Category Description Specification ACEA - A3/B4-98 | ACEA - E2 LEVEL | API - CF-4/SJ | MB - 228.1 | VOLVO - VDS LEVEL Application This motor oil is suitable for petrol engines, with or without turbo, diesel engines, even during longer oil changes. - Zn level - 960ppm

Bardahl Classic Motor Oil SAE 30 is a 100% mineral single grade motor oil, developed for the lubrication of petrol engines from 1900 to 1950. Bardahl Classic Motor Oil SAE 30 has a minimum of additives and is therefore fully compatible with bronze, copper, brass and non-ferrous metals. The viscosity matched to classics ensures constant oil pressure, which keeps oil consumption to a minimum. It is suitable for sealing materials of that time (paper, felt and fabric). The excellent adhesion contributes to minimal wear of the engine when starting, even after a long standstill. Category Description Specification API - SB Application Suitable for vintage cars from 1900 to 1950. - Zn level - 450ppm